Connecting your computer or device to a study room screen

Quick Start

On the switch next to the wall-mounted screen, press ON.

Press HDMI 1 to connect via the HDMI cable.

OR

Press HDMI 2 to connect wirelessly. Then follow the on-screen prompts. (See below for complete details.)

Casting wirelessly

On the switch next to the wall-mounted screen, press Display > ON. Press HDMI 2.

Follow the instructions on the screen.

• Connect your computer or device to the CCPL wireless network.
• In your internet browser’s address box, type whatever follows https:// in step 2 on the screen and press Enter.
• Click Launch in Browser. If you are using a mobile device, you will need to tap Get the App and install the Mersive Solstice app before continuing.
• If you encounter a privacy warning screen, don’t panic. This alert is simply to remind you that you’re connecting through a public network. Click Proceed or Continue. (This option may be under Advanced.) Alternatively, you can connect directly to the screen via an HDMI cable using the steps in the next section.

(Note that Apple users can connect via AirPlay instead of following the steps above.)

If you’re using the app, you’ll next select which study room you’re using.

Enter the code shown on the wall-mounted screen. Enter your name and click Launch.

You can then choose which window or tab to share. Make sure to check the Share system audio box if you want to share audio, too. Then click Share.

Note that the wall switch also has volume buttons you can adjust.

To disconnect from the screen, close the Solstice Quick Connect tab in your browser. Then press OFF on the wall switch.

Connecting with HDMI

Connect your computer or device to the HDMI cable on the study room table. On the switch next to the wall-mounted screen, press Display > ON. Press HDMI 1. (Note that only one device can be connected to the screen at a time if you’re using HDMI.) When you’re finished, press OFF on the wall switch.